:: PRODUCTS | MAGNETIC LIFTING EQUIPMENT

  There are currently Five different types of Permanent Magnet Hoisters avaiable with different performance, sizes and weights.

MaxX 250
MaxX 500
MaxX 1000
MaxX 1500
MaxX 2000

In order for the hoister to function in an appropriate and lasting way, the chosen model must be adequate for the work needed.

The parameters that must be taken into consideration are:
Lifting Power: it is to be determined by the maximum weight to be lifted (lifter plus load). It must never exceed that of the lifting apparatus (crane, etc.).

Load Features: the material must have a smooth and clean surface, must be of adequate thickness and must be ferromagnetic. The steel must be of low carbon content otherwise, if "bonded", appropriate reductions should be made

CONSTRUCTION
The Maxx mechanical structure provides very few components. Rotor and stator, made of steel and with a high magnetic permeability degree, are obtained through mechanical manufacturing of a solid workpiece, controlled by digital machines. This ensures the desired uniformity, solidity and quality needed for mass-produced magnetic lifters.The material used (steel, aluminum, plastic) is easy to dispose of and to recycle when dismantling the machine.

The magnetic material used with high specific energy, has allowed the manufacturer to highly reduce product weight and size. In order to ensure high quality of performance, the Maxx lifter is magnetized all in one go after assembly, by means of the greatest magnetizing apparatus ever made in Europe. The manufacturer carries out all the required tests on the lifter before it is delivered to the customer.

PERFORMANCE
The nominal lifting power is based on a steel load with a greater thickness than the width of the polar expansion. For any material other than soft steel the following reduction factors must be used to calculate the appropriate lifting power: alloy steel=0.8: steel with a high amount of carbon= 0.7: cast iron=0.45. The thickness of the load also influences the lifting power of the hoister: for those thicknesses smaller than the polar width there is a reduction, in the lifting power, proportional to the ration of the thickness and the following width: K = S/l
The load temperature must not exceed 80°C; for greater temperatures contact our technical staff

A) Load characteristics: Hoisting performance is shown on the nameplate on each individual hoister together with the
geometric characteristics of the load. Said performance is also shown in the following pages and it is relative to the different hoister models.